Class I Zone 1 AEx d IIC T6
Class I, Groups B, C & D; Class II, Groups F & G; Temperature Code T6; Enclosure Type 4X

• Receptacles with Plugs and Attachments for Standard and Reverse Service Applications rated 30, 60, 100 and 200 Amps at 600 Vac, max.
  

  Type GB-a, b, c - d, e, f1, g - h - i	and	SB-a, b, c - d, e, f1, g - h – i
  Type GD-a, b, c - d, e, f1, g - h - i	and	SD-a, b, c - d, e, f1, g - h – i
  Type GDT-a, b, c - d, e, f1, g - h - i	and	SDT-a, b, c - d, e, f1, g - h – i
  Type GDU-a, b, c - d, e, f1, g - h - i	and	SDU-a, b, c - d, e, f1, g - h – i
  Type AF-a, b, c - d, e, f1, f2, g - h - i	and	SF-a, b, c - d, e, f1, f2, g - h – i

   

  Where:	a:	Cover
  			B = Cover / receptacle
  			D = Cover / plug
  	b:	Shell Style
  			10 = Plug, Attachment
  			15 = Receptacle, Attachment
  			17 = Box or Panel mount
  			19 = NPT mount in 1 ½, 2, 2 ½ and 3”
  	c:	Shell Size (16, 20, 24, 28)
  	d:	Insert	30, 60,100, 200 amps for GD/SD, GB/SB, GDU/SDU and GDT/SDT 10 through 143 contacts through 250 Vac for AF/SF
  	e:	Gender
  			S = Female (Socket)
  			P = Male (Pin)
  	f1:	Contact Type (L= Pressure or Crimp Contacts)
  	f2:	Contact Plating (AF / SF Receptacles, Plugs & Attachments only)
  			Blank = Silver is standard
  			K = Gold over Silver
  			D = Gold over Nickel
  	g:	Insert Keying
  			Blank = Normal
  			Alternate = N+2 to 10 (see insert table)
  	h:	Accessory (Receptacles) / Grommet (Plugs & Attachment Receptacles)
  		For Accessory	Blank = Panel, 17 style or NPT, 19 Style – see junction box table
  		For Grommet (cable diameter code)
  			TC = Tapped Conduit
  			B = Basket Weave
  	i:	Variation (see Wire Length table (L12, L24, L36 etc))

Note: Type GD and SD, GDT and SDT and GDU and SDU Single and Duplex Ground Power Receptacles rain tight when installed in concrete, for use with type GD or SD, GDT or SDT, GDU or SDU plugs rated 30,60 100 and 200 Amps at 600 Vac, max.